- Turn Off the Power
- Switch off the hot tub at the breaker to ensure safety while draining.
- Never attempt to drain the tub while the pump or heater is running, as this can damage the equipment.
- Check Local Regulations
- Confirm that you can drain the water into your yard, sewer, or storm drain, depending on local guidelines. Avoid draining chemically treated water into natural water sources.
- Let the Water Cool
- Allow the water to cool to a safe temperature before draining. Hot water can damage hoses or harm plants and grass.
- Attach a Garden Hose to the Drain Valve
- Locate the drain valve, typically near the base of the hot tub.
- Connect a garden hose to the valve to direct the water to your desired drainage location.
- Open the Drain Valve
- Open the valve to start the draining process. Gravity will empty the water, though it may take some time depending on the tub’s size.
- Monitor the hose to ensure the water is draining properly and not causing flooding.
- Use a Submersible Pump (Optional)
- For faster draining, you can use a submersible pump. Place it in the deepest part of the tub and connect it to a hose to direct the water out.
- Remove Remaining Water
- Once most of the water has drained, use a wet/dry vacuum, sponge, or towels to remove any residual water from the tub and plumbing.
- Clean the Hot Tub
- Take the opportunity to clean the hot tub shell with a non-abrasive cleaner. Rinse thoroughly to remove any cleaning residue.
- Close the Drain Valve
- Once the tub is completely empty and cleaned, securely close the drain valve to prevent leaks when refilling.
- Refill or Cover the Hot Tub
- If you plan to use the tub again soon, follow the steps for refilling. Otherwise, cover it to protect it from debris and weather.
Tips!
- Drain your hot tub every 3–4 months to maintain water quality.
- If you’re using a submersible pump, ensure it is compatible with hot tubs.
- Always refer to your hot tub’s user manual for specific draining instructions.